adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The
Pure50+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in
solid concrete base materials.
General Applications and Uses:
- Bonding threaded rod and reinforcing bar into hardened concrete
- Evaluated for installation and use in dry, wet, and water-filled holes
- Can be installed in a wide range of base material temperatures
Features and Benefits:
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes valuated and recognized for long term and short term loading
Approvals and Listings:
- International Code Council, Evaluation Service (ICC-ES) ESR-3576 for cracked and uncracked concrete.
- Code Compliant with the 2012 IBC, 2012 IRC, 2009 IBC, 2009 IRC, 2006 IBC, and 2006 IRC.
- Conforms to requirements of ASTM C 881, Types I, II, IV and V, Grade 3, Classes B & C (also meets Type III except for elongation)Department of Transportation listings
- Tested in accordance with ACI 355.4 / ASTM E488, and ICC-ES AC308 for use in concrete
- Evaluated and qualifi ed by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading
- Compliant with NSF/ANSI Standard 61 for Drinking Water System Components – Health Effects; minimum requirements for material in contact with potable water and water treatment








Reviews
There are no reviews yet.